Thermographic imaging as alternative method in allergy diagnosis

Allergen sensitization is being diagnosed by commonly available methods in clinical practice—skin prick tests (SPTs) and specific immunoglobulin E test (sIgE). Recently, a new thermographic (TH) method for the assessment of SPT was developed, and it was demonstrated that the TH measurements of forearm temperature distribution during SPT, supported by a mathematical model, offer a new quantification method of allergen-induced skin reactions. The aim of this study is a comprehensive comparison of the TH method with SPT and sIgE techniques. The studies were performed for a group of 51 patients. The SPT and sIgE examinations were done in a routine way. For TH analyses, set of thermograms of both forearms were acquired after prick and analyzed with the use of developed software. All results were converted into categorized scale for comparison. The collected results indicate high correlation coefficients between methods equal to 0.76–0.99. Sensitivity and accuracy of TH assessment in respect of both SPT and sIgE methods is at good level (0.72–0.93). Acceptable level of specificity 0.60–0.88 was also achieved for most allergic responses. Excellent agreement between SPT and sIgE methods was observed which makes the TH assessment competitive. Due to higher precision and sensitivity of digital infrared technology, possibility of making error in diagnosis is significantly reduced. Additional advantage of the TH method relies on an estimation of the skin reactivity which allows highlighting the hypersensitivity patients and automatic correction of the diagnosis.     

Thio Analogues of Pyrimidine Bases: Syntheses and Spectral Study of New Potentially Biologically Active 2,4-Di-Ortho-(Meta- and Para-)Bromo- (Chloro and Nitro)-Benzylthio-5-Bromouracils (and 6-Methyluracils)

Eighteen new 2,4-di-ortho- (meta- and para-) bromo-(chloro- and nitro-)benzylthio-5-bromouracils (and 6-methyluracils) have been prepared. The structures of these compounds were confirmed by spectral (IR, UV/vis, ¹H NMR) and elemental analyses. Estimation of pharmacotherapeutic potential has been made for synthesized compounds on the basis of prediction of activity spectra for substances (PASS).     

Normalization procedures and reference material selection in stable HCNOS isotope analyses: an overview

The uncertainties of stable isotope results depend not only on the technical aspects of measurements, but also on how raw data are normalized to one of the international isotope scales. The inconsistency in the normalization methods used and in the selection of standards may lead to substantial differences in the results obtained. Therefore, unification of the data processing protocols employed is highly desirable. The best performing methods are two-point or multipoint normalization methods based on linear regression. Linear regression is most robust when based on standards that cover the entire range of δ values typically observed in nature, regardless of the δ values of the samples analysed. The uncertainty can be reduced by 50 % if measurements of two different standards are performed four times, or measurements of four standards are performed twice, with each batch of samples. Chemical matrix matching between standards and samples seems to be critical for δ ¹⁸O of nitrate or δ ²H of hair samples (thermal conversion/elemental analyser), for example; however, it is not necessarily always critical for all types of samples and techniques (e.g. not for most δ ¹⁵N and δ ¹³C elemental analyser analyses). To ensure that all published data can be recalculated, if δ values of standards or the isotope scales are to be updated, the details of the normalization technique and the δ values of the standards used should always be clearly reported.     

Magnetic resonance study of annealed and rinsed N-doped TiO2 nanoparticles

Nanoparticles of nitrogen-modified TiO₂ (N-doped TiO₂) calcined at 300°C and 350°C, have been prepared with and without water rinsing. Samples were characterized by x-ray diffractrometry (XRD) and optical spectroscopy. The electron paramagnetic resonance (EPR) spectra from centers involving oxygen vacancies were recorded for all samples. These could be attributed to paramagnetic surface centers of the hole type, for example to paramagnetic oxygen radicals O^?, O₂ ^? etc. The concentration of these centers increased after water rising and it further increased for samples annealed at higher temperature. Additionally, for samples calcined at 300°C, and calcined at 350°C and rinsed, the EPR spectra evidenced the presence of magnetic clusters of Ti³⁺ ions. The photocatalytic activity of samples was studied towards phenol decomposition under unltraviolet-visible (UV-Vis) irradiation. It was found that, in comparison to the starting materials, the rinsed materials showed increased photocatalytic activity towards phenol oxidation. The light absorption (UV-Vis/DRS) as well as surface Fourier transform infrared/diffuse reflectance spectroscopy (FTIR/DR) studies confirmed a significantly enhanced light absorption and the presence of nitrogen groups on the photocatalysts surfaces, respectively. A significant increase of concentration of paramagnetic centers connected with oxygen vacancies after water rising has had an essential influence on increasing their photocatalytic activity.      

Preparation of Sec-Alkyl Isouronium Salts

Eight examples of sec-alkyl isouronium salts were readily prepared from sec-alcohols, cynamide, and methanesulfonic acid (or CF₃SO₃H or HBF₄).     

Synthesis, crystal, molecular, and electronic structures of hydride carbonyl ruthenium(II) complexes with pseudohalide ligands

Two pseudohalide hydride carbonyl ruthenium(II) complexes with formulae: [RuH(N₃)(CO)(PPh₃)₃] (1) and [RuH(NCO)(CO)(PPh₃)₃] (2) have been synthesized by the reactions of [RuHCl(CO)(PPh₃)₃] with sodium azide or sodium cyanate, respectively, and are compared with the previously described thiocyanate analog [RuH(NCS)(CO)(PPh₃)₃]. The molecular structures of the new compounds were determined by X-ray crystallography and their spectroscopic properties have been studied. Based on the crystal structures, computational investigations have been carried out in order to determine the electronic structures of the complexes. The electronic spectra were calculated with the use of time-dependent DFT methods, and the electronic spectra of the transitions were correlated with the molecular orbitals of the complexes.     

Unusual potassium-oxalate coordination in the two-dimensional trimetallic [CoCl(NH3)5][KCr(C2O4)3]·0.5H2O complex

A new heterometallic compound, [CoCl(NH₃)₅][KCr(C₂O₄)₃]·0.5H₂O (1), has been synthesized and characterized by elemental analysis, IR and electronic spectra, thermal analysis, variable temperature magnetic susceptibility measurements, and single crystal X-ray diffraction. Compound 1 consists of two-dimensional [{KCr(C₂O₄)₃}_n]^2n? layers, [CoCl(NH₃)₅]²⁺ ions and water molecules. Within the 2-D layer, three different types of oxalate coordination modes are present. Each K cation is coordinated by eight oxygen atoms from oxalate groups and also weakly interacts with the ninth oxygen atom. The extensive network of hydrogen bond is formed between the [KCr(C₂O₄)₃]^2? layer and the [CoCl(NH₃)₅]²⁺ ions. These interactions involve all hydrogen atoms of ammonia ligads and water molecule.     

Synthesis of Some Aminophosphonates Bearing N‐(Fluorophenyl)‐piperazynyl Moiety and Their Activity toward Serotonin Receptors

Syntheses of a series of compounds bearing a 1‐(fluorophenyl)piperazin‐4‐ylmethyl moiety, namely dialkyl 1‐(fluorophenyl)piperazin‐4‐ylmethyl phosphonates 3a–f , diethyl 2‐[1‐(fluorophenyl)piperazin‐4‐yl]‐ethyl phosphonates 4a,b , diethyl 3‐[1‐(4‐fluorophenyl)‐piperazin‐4‐yl]‐propyl phosphonate 5 , and di[1‐(fluorophenyl)piperazin‐4‐yl]methanes 6a,b were performed, and some of them were screened for their affinity for serotonin 5‐HT_1A, 5‐HT₆, and 5‐HT₇ receptors. Moderate interactions with these receptors were demonstrated.     

Siloxanes in Biogas: Approaches of Sampling Procedure and GC-MS Method Determination

A new approach of siloxane sampling based on impinger, micro-impinger, adsorption on active carbon, and direct TedlarBag methods followed by gas chromatography-mass spectrometry (GC-MS) was developed for the analysis of three linear (L2–L4) and four cyclic (D3–D5) volatile methyl siloxanes (VMSs). Three kinds of organic liquid-medium characterized by different polarities, namely acetone, methanol, and d-decane as siloxanes trap were arranged in the experiment which is widely discussed below. Thus, the GC-MS equipped with SUPELCOWAX-10 capillary column was employed to perform monitoring of VMS content in the analyzed biogas samples originating from landfill, wastewater treatment plants, and agriculture biogas plants. In all samples that have undergone the analysis, cyclic and linear VMSs were found in quantities exceeding 107.9 and 3.8 mg/m³, respectively. Significant differences between siloxanes concentrations depending on biogas origin were observed. Moreover, the high range of linearity (0.1 to 70.06 mg/m³), low LoD (0.01 mg/m³), low LoQ (0.04 mg/m³), and high recovery (244.1%) indicate that the procedure and can be applied in sensitive analyses of silica biogas contaminants. In addition to the above, the impinger method of sampling performed better than active-carbon Tube and TedlarBag, particularly for quantifying low concentrations of siloxanes. Overall, the evaluation of sampling methods for biogas collection simplified the analytical procedure by reducing the procedural steps, avoiding the use of solvents, as well as demonstrated its applicability for the testing of biogas quality.